Optimized production and work processes. From defoamers to antistatic agents and assembly aids. Silikonspray Chemische Hilfsstoffe

THE WORLD OF

SILICONE SPRAYS & TECHNICAL SPRAYS

Well-controlled application of various active ingredients.

All of our technical sprays are optimized with the appropriate spray head and propellant gases for an ideal discharge rate for precise application of the active ingredient.

We do not use solvents, as these increase the risk potential for people and the environment. Almost all of our products can be filled in spray cans.
Please feel free to contact us on this topic.

Silicone spray

LOBOSIL SPRAY is a highly effective release agent and lubricant based on a combination of different silicone oils (polydimethylsiloxanes). It is filled without solvents and the gas pressure is specially adjusted for an optimally metered spray jet.

LOBOPUR SPRAY is a silicone release spray based on modified polydimethylsiloxanes, especially for cast resins and polyurethanes.

Silicone paste spray

ELBESIL BM SPRAY is a solvent-free, sprayable silicone paste based on thermostable silicone oils and non-melting, highly dispersed silica. The active ingredient of ELBESIL BM SPRAY can be used at temperatures from – 40°C to + 200°C after complete evaporation of the propellant gas components without any change in consistency. ELBESIL BM SPRAY is insoluble in water, exhibits pronounced hydrophobic behavior and is resistant to water vapor.

Release spray silicone-free

TRENNFIX SPRAY is a highly effective release agent based on a native oil, which enables subsequent painting, bonding and metallizing of the workpieces.

TRENNFIX 562 SPRAY is a highly effective release agent based on mineral oils, which enables subsequent painting or bonding of the workpieces. TRENNFIX 562 SPRAY is suitable for PC and PMMA, as it does not cause stress cracks in these materials.

Welding protection spray

TRENNFIX SPRAY is a highly effective welding release agent based on a native oil, which enables subsequent painting and metallization of the workpieces.

TRENNFIX WR 20 SPRAY is an aqueous, highly effective welding release agent that enables subsequent painting and metallization of the workpieces.

TRENNFIX WR 20 SPRAY is non-flammable, solvent-free and silicone-free. It is filled with compressed air. The preparation contains a rust inhibitor that prevents the corrosion of ferrous metals.

We also offer the ELBESIL 751 spinneret spray for filament production in the textile industry, the rust-free corrosion protection spray for ferrous metals, e.g. injection molds, and antistatic sprays to prevent static build-up during the processing and machining of plastics.

FAQ – THE MOST IMPORTANT QUESTIONS ABOUT SILICONE SPRAYS & TECHNICAL SPRAYS

Standard products do not always meet the requirements of specialized industrial applications. A specialized manufacturer develops technical sprays and silicone sprays specifically for certain materials, environmental conditions, and processes.

By adjusting active ingredients, lubricating performance, corrosion protection, temperature resistance, or material compatibility, maintenance efforts can be reduced, processes optimized, and components protected over the long term.

Yes. We develop and manufacture custom sprays for industry, maintenance, servicing, and technical applications.

Depending on the application, we can tailor the following properties, among others:

  • Lubrication and slip performance
  • Corrosion protection
  • Water repellency
  • Temperature resistance
  • Penetration ability
  • Material compatibility
  • Release properties
  • Electrical properties
  • Evaporation behavior

Yes. We support companies with:

  • Product optimization
  • Reformulation
  • Supplier transitions
  • Performance improvements
  • Adaptation to regulatory requirements
  • Process optimization
  • Cost reduction

We analyze the existing application and develop a technically and economically suitable alternative.

Yes. In addition to our standard spray can versions, we also offer different types of spray cans in various sizes and with customized configurations.

The design of the spray can is essential for successful application. Only when the combination of active ingredient, spray can version, and application is optimally aligned can the desired requirements be achieved.

Typical configurations include:

  • Spray can sizes from 100 to 600 ml
  • Painted cans
  • Spray cans with open seam or necked-in design
  • Form-fitting lids or overlapping lids
  • Spray heads with different discharge rates
  • Spray heads with extension tubes
  • Adjustable spray heads
  • Specifically tailored propellant pressure
  • Different propellant gases

Depending on their formulation, technical sprays perform different functions in maintenance, production, and servicing.

Typical properties include:

  • Good lubricating and slip properties
  • Corrosion protection
  • Water and moisture repellency
  • Reduction of friction and wear
  • Protection against aging
  • Good creeping ability
  • Easy application
  • Fast distribution on surfaces

Silicone sprays typically form a thin, colorless protective and lubricating film on a wide range of materials.

We offer technical sprays in different product groups:

  • Silicone sprays
  • Lubricant sprays
  • Slip agent sprays
  • Corrosion protection sprays
  • Release agent sprays
  • Maintenance sprays
  • Cleaning and care sprays
  • Specialty formulations

The selection depends on the material, application, and operating conditions.

Depending on the formulation, technical sprays can be used at both low temperatures and elevated temperatures of up to 300°C.

Silicone sprays are often chosen for applications where temperature resistance, water repellency, and long-term stability are required. The specific suitability is defined based on the respective operating conditions.

Many technical sprays offer high resistance to:

  • Moisture
  • Weathering
  • Oxidation
  • UV radiation
  • Corrosion
  • A wide range of industrial chemicals

The actual resistance depends on the specific formulation and application.

Our products are used across a wide range of industrial sectors, including:

  • Automotive industry
  • Mechanical engineering
  • Plastics processing
  • Electrical and electronics industry
  • Food industry
  • Packaging industry
  • Metal processing
  • Energy technology
  • Maintenance and servicing

Technical sprays are used in a wide range of industrial applications.

Typical areas of application include:

  • Lubrication of moving components
  • Maintenance of machines and equipment
  • Corrosion protection
  • Protection of electrical contacts
  • Release applications
  • Care of plastic and rubber parts
  • Noise reduction
  • Cleaning of technical components
  • Moisture protection

In the plastics industry, silicone sprays are commonly used as release agents and to reduce friction and protect surfaces.

Typical applications include:

  • Sliding surfaces
  • Conveyor systems
  • Plastic guides
  • Mold release
  • Assembly processes
  • Protection of sensitive surfaces

Silicone sprays are often compatible with many plastics and elastomers and leave a thin protective film.

Special technical sprays are used for electrical and electronic applications.

Typical products include:

  • Protective sprays for electrical connections
  • Moisture protection sprays
  • Maintenance sprays for plug-in connectors
  • Cleaning and care sprays

These products can reduce contamination, protect contacts, and improve the operational reliability of electrical systems.

Silicone sprays offer several advantages in many applications:

  • Water-repellent effect
  • Colorless protective film
  • Good material compatibility
  • Suitable for plastics, rubber, and metal
  • Low dirt attraction
  • High temperature resistance
  • Corrosion protection

This makes them particularly suitable for applications where clean lubrication and surface protection are required.

Depending on the product, you will receive:

  • Technical Data Sheets (TDS)
  • Safety Data Sheets (SDS)
  • Product specifications
  • Application-specific information

Yes. During product development, we already take relevant legal, technical, and industry-specific requirements into account.

This allows technical sprays to be specifically tailored to different markets and applications.

Yes. For development projects, product approvals, and validation processes, we provide samples, pilot batches, or small quantities—depending on the project.

This allows products to be tested early under real application conditions.

Our development process typically includes:

  1. Requirements analysis
  2. Technical consultation
  3. Formulation development
  4. Laboratory and application testing
  5. Optimization and validation
  6. Serial production

We support our customers from the initial idea through to the final product solution.

For a quick technical evaluation, the following information is helpful:

  • Industry and application
  • Material surfaces
  • Desired function
  • Temperature range
  • Environmental conditions
  • Lubrication or protection requirements
  • Required quantities
  • Regulatory requirements

The more detailed the requirements are described, the more precisely a suitable formulation can be developed.

The development time depends on the complexity of the application, required testing, and the scope of validation.

After an initial technical analysis, we create a realistic project plan and coordinate the individual development steps together with you.