Silicone emulsions.
 The smart way to dispense silicone oils with water! Silikonemulsion mit Tropfen

THE WORLD OF

SILICONE EMULSIONS

The smart way to dispense silicone oils with water.

Applying silicone oils in a thin layer either requires a special application technique or is not possible without specific dilution. As solvents are increasingly being dispensed with for reasons of environmental protection and occupational safety, it is advisable to use an emulsion that can be elegantly diluted with water in any ratio.

We offer silicone oil emulsions formulated for different applications.

ELBESIL EM 6435 – and EM 6460

ELBESIL EM 6435 – and EM 6460 are aqueous emulsions based on a medium viscosity silicone oil. They are non-ionic and have excellent stability and are particularly suitable for mixing with other emulsions or various aqueous additives

ELBESIL EM 6735- and EM 6760

ELBESIL EM 6735- and EM 6760 are aqueous emulsions based on non-reactive silicone oils and non-ionic emulsifiers made from plant-based raw materials. They do not cause stress corrosion cracking on polycarbonate (PC) and acrylic glass (PMMA). They have excellent stability over a wide pH range. They can be mixed with water in any ratio and are extremely frost-resistant.

ELBESIL EM 6500

ELBESIL EM 6500 is an aqueous emulsion based on a highly viscous silicone oil. It has excellent stability and can preferably be diluted with demineralized or softened water in any ratio.

ELBESIL EM 460

ELBESIL EM 460 is an aqueous emulsion based on a non-reactive medium viscosity silicone oil. All ingredients in ELBESIL EM 460 are FDA listed and comply with the regulations of the German BfR notification for silicones chapter XV and the “synoptic document (2005.07.25.EU) as well as FDA, 21 CFR 176.170, 176.210 and 175.300.

ELBESIL EM 6605- and EM 6632

Our ELBESIL EM slide emulsions for the printing industry with a focus on web offset are based on a combination of silicone oils and additives. The emulsions provide very good sliding properties and excellent rub resistance of the printed paper webs. Their optimized wetting of the roller and paper ensures seamless application and provides the desired protection very quickly.

We look forward to your inquiry, please do not hesitate to contact us.

All products from L. Böwing GmbH, whether raw material or formulation, are also expressly available ready-made. Tell us what you want in terms of container and packaging and we will make it happen.

FAQ – THE MOST IMPORTANT QUESTIONS ABOUT SILICONE EMULSIONS

Standard products do not always meet the specific requirements of modern industrial applications. A specialized manufacturer develops, produces, or modifies silicone emulsions precisely according to technical and application-specific requirements.

Through targeted adjustment of solids content, particle size, emulsifier system, dilution level, surface performance, or material compatibility, processes can be optimized and product properties can be significantly improved.

Yes. We develop and supply custom silicone emulsions for a wide range of industrial applications.

Depending on the application, we can tailor the following properties, among others:

  • Silicone content and solids content
  • Additive formulation
  • Particle size
  • Emulsifier system
  • Active ingredient concentration
  • Slip and release properties
  • Gloss effect
  • Material compatibility
  • Processing characteristics

Yes. We support companies with:

  • Product optimization
  • Reformulation
  • Supplier transitions
  • Performance improvements
  • Adaptation to regulatory requirements
  • Cost optimization
  • Process improvements

The goal is to improve performance, cost efficiency, and processing reliability.

Silicone emulsions offer a wide range of technical benefits and are used in many industries as additives, processing aids, or surface finishing agents.

Typical properties include:

  • Surface protection
  • Good spreadability on surfaces
  • Slip and lubricating properties
  • Release properties
  • Gloss improvement
  • Reduction of static charge
  • UV and aging resistance
  • Good material compatibility

The properties vary depending on the type of silicone, emulsifier system, and formulation.

We offer silicone emulsions in a wide range of concentration levels—from low-concentration ready-to-use products to high-concentration emulsions for further processing.

The selection depends, among other factors, on:

  • Application area
  • Application method
  • Desired active ingredient concentration
  • Surface characteristics
  • Process requirements

Silicone emulsions are suitable for a wide range of industrial applications and can also be used under demanding temperature conditions.

The exact temperature resistance depends on the formulation, the type of silicone, and the specific operating conditions.

Many of our silicone emulsions offer good resistance to:

  • Moisture
  • Weathering
  • UV radiation
  • Oxidation
  • A wide range of chemicals

The exact chemical resistance is tailored to the specific application.

Our silicone emulsions are used in a wide range of industrial sectors, including:

  • Textile industry
  • Paper industry
  • Plastics processing
  • Automotive industry
  • Construction industry
  • Wood industry
  • Chemical industry
  • Coatings and paint industry
  • Packaging industry

Silicone emulsions are used in a wide range of technical applications.

Typical application areas include:

  • Surface hydrophobization
  • Release agent applications
  • Slip agents and lubrication aids
  • Textile finishing
  • Paper coating
  • Surface protection
  • Gloss improvement
  • Additives for paints and coatings
  • Processing aids

In textile finishing, silicone emulsions are used to make fabrics softer, more slippery, and more water-repellent.

Typical applications include:

  • Soft-hand finishing
  • Hydrophobization
  • Improvement of slip properties
  • Surface finishing
  • Care and protective treatments

Depending on the type of textile, we develop individually tailored formulations.

For paper and packaging applications, silicone emulsions are commonly used to:

  • Improve surface quality
  • Increase water repellency
  • Optimize slip properties
  • Reduce friction
  • Support processing operations

The formulations are tailored to the specific production requirements.

Depending on the product, you will receive:

  • Technical Data Sheets (TDS)
  • Safety Data Sheets (SDS)
  • Certificates of Analysis (CoA)
  • Product specifications
  • Application-specific documentation

Yes. During product development, we already take relevant legal, technical, and market-specific requirements into account.

This allows silicone emulsions to be specifically designed for different industries and target markets.

Yes. For development projects, product approvals, and validations, we provide samples, pilot batches, or small quantities—depending on the project.

This allows silicone emulsions to be tested under real application conditions.

Our development process typically includes:

  1. Requirements analysis
  2. Technical consultation
  3. Formulation development
  4. Laboratory and application testing
  5. Optimization and validation
  6. Serial production

We support our customers from the initial idea through to the final product solution.

For a quick technical evaluation, the following information is helpful:

  • Industry and application
  • Currently used product
  • Desired target requirements
  • Surface characteristics
  • Concentration requirements
  • Process conditions
  • Required quantities
  • Regulatory requirements

The more detailed the requirements are described, the more precisely a suitable silicone emulsion can be developed.

The development time depends on various factors, such as formulation complexity, required testing, and the scope of validation.

After an initial technical analysis, we create a realistic project plan and coordinate the individual development steps with you.